Proxim Tsunami MP-8100 Series - E Statement of Warranty; Warranty Coverage; Repair or Replacement; Limitations of Warranty

Technical Specifications
Tsunami MP-8100 Installation and Management Guide 201
Software Features
Category Specification
Key Features • WORP protocol
• Transmit Power Control
• Antenna Alignment
• Integrity Check for Software Upload
• IEEE 802.16e based QoS Support; up to 8
classes of service, up to 8 service flows per
class (BSU only)
• Satellite Density
• Enhanced Frequency Selection
Bridging and Routing • Bridge (802.1d)
• IP/ RIPv1 (RFC 1058)
• IP/ RIPv2 (RFC 1388)
• CIDR (RFC 1519)
• ICMP (RFC 792)
• IP (RFC 791)
• ARP (RFC 826)
Filtering • Ethernet protocol (Ethertype)
• Static MAC
• IP address
• Broadcast protocol
• WORP Intra-Cell Blocking
Services • DHCP Server (RFC 2131)
• DHCP Client (RFC 2131)
• Bi-Directional Bandwidth Control
• NAT (RFC 3022) (Configured on SU)
• DHCP Relay (RFC 2131) (Configured on SU)
VLAN • 802.1Q (Configured on BSU)
Security Features • Critical feature support via WORP for secure
long-range wireless deployments in
unlicensed frequency spectrum
• MD5 (embedded in WORP) authentication
between BSU and SU
• MAC Authentication (Configured on BSU)
• Secure “over the air encryption” and
AES-CCM, WEP and TKIP
• RADIUS MAC Access Control (Configured on
BSU)