Installation and Initialization
Tsunami MP-8100 Installation and Management Guide 31
NOTES:
• Depending on the settings made during the device initialization, the IP address may be either a dynamic IP address
assigned by a network DHCP server or a static IP address which is manually configured. Refer to ScanTool for
information on how to determine the device’s IP address and manually configure a new IP address.
• If the connection is slow or unable to connect, use the Internet Explorer Tools option to ensure that you are not using
a proxy server for the connection.
• If you are unable to log into the configuration pages by using default user name and password, please check with the
administrator or follow Forced Reload procedures.
• For security purposes, it is recommended to change Password from the default “public” immediately to restrict
unauthorized access to the device.
2.5.1 System Summary
Upon successful login, the system summary of the device is displayed on the screen. The system summary mainly displays the
general information and current state of the system, such as System Name, IP Address, Interface Status, and Event Log.
Figure 2-6 System Summary Page
To Next Page
Loading...