Tsunami MP-8100 Installation and Management Guide 82
Figure 4-23 QoS PIR TCP/UDP Destination Port Add Entry
b. All the entries present in the PIR TCP/UDP Port Entries are displayed in the TCP/UDP Port Entry Table. Select the
appropriate radio button and click Add. After adding the entry for this specific PIR, it is displayed in the Existing
TCP/UDP Port Entries table. For deleting an entry, click Delete for the corresponding entry in the PIR Details page.
Adding Source IP Address
a. Click Add to add a new entry. The following screen appears.
Figure 4-24 QoS PIR Source IP Address Add Entry
To Next Page
Loading...
