Tsunami MP-8100 Installation and Management Guide 99
Figure 4-40 VLAN operation in Trunk Mode
To enable Trunk mode, click ADVANCED CONFIGURATION > VLAN > Ethernet and enter the settings as described in the
following table:
Adding New Trunk Table Entries
To add new table entries
1. Click Add in the VLAN Ethernet Configuration screen. The VLAN Trunk Table Add Row page appears.
Parameter Description
Interface Displays the name of the interface.
VLAN Mode Select the VLAN Mode as Trunk.
Allow Untagged
Frames
Select Enable or Disable for this option.
Enable If this option is selected, an interface in
trunk mode forwards both tagged
frames whose VLAN ID matches with
one of the VLAN IDs of the trunk table
and untagged frames.
Disable If this option is selected, an interface in
trunk mode forwards only tagged
frames and drops untagged frames.
To Next Page
Loading...