Need help?Do you have a question about the Proxxon DSH and is the answer not in the manual?
General| Type | Scroll Saw |
|---|---|
| Power Consumption | 205 W |
| Throat Depth | 400 mm |
| Max Cutting Height | 50 mm |
| Maximum Cutting Depth (Plastic) | 50 mm |
| Maximum Cutting Depth (Non-ferrous Metals) | 10 mm |
| Table Size | 360 x 180 mm |
Secure the saw with two screws on a solid workbench using the provided drill holes.
Mount the saw blade guard in the upper plastic cover; it is a critical safety tool.
Clamp standard blades with cross pins and hand blades without cross pins into the saw blade mount.
Turn knurled button to set tensioning; correctly tensioned blade sounds a slight tone when plucked.
Switch on machine, guide workpiece, adapt feed to material, blade, and thickness.
To Next Page
