Need help?Do you have a question about the Proxxon MBS 240 / E and is the answer not in the manual?
General| Motor power | 200 W |
|---|---|
| Cutting width | 240 mm |
| Weight | 8.5 kg |
| Throat | 240 mm |
| Table size | 200 x 200 mm |
Guide the workpiece with sensitivity and minimal force. Apply more pressure to the work table.
Adjust the required angle at the limit stop and guide the workpiece against the saw band.
Tilt the work table from 0° to 45° using the clamping screw to achieve angled cuts.
Adjust the saw band tension correctly to prevent damage and ensure smooth operation.
Replace worn or damaged saw bands immediately. Ensure correct tension and alignment.
Position the saw band guide as close to the workpiece as possible for optimal cutting.
Adjust guide bearings to match saw band width for proper alignment and performance.
Correct thickness with setting screw for proper guidance without jamming.
Ensure the lower band guide slot is perpendicular for correct saw band guidance.
Ensure proper cooling for glass/ceramics. Do not use for metal, plastic, or wood.
Ensure the red plastic table insert is in perfect condition; replace if deformed or worn.
Do not dispose of the device in household waste; recycle responsibly.
To Next Page
