Cleaning,maintenance and care
Caution:
Do not begin to clean the machine -and especially not the
saw
band -aslong as the machine is still running! This
could result in injuries.
The machine is largely maintenance free. To ensure a
long service life, however, the machine should be cleaned
with
asoft, possibly moist cloth, handbrush or paintbrush
after each time it is used.
The
use of avacuum cleaner is also recommended here.
Caution!
The outside of the housing can be cleaned with asoft,
possibly damp cloth.
In this process, mild soap or another suitable cleaning
agent can be used.
Solvents or cleaning agents containing alcohol (e.g.
petrol, cleaning alcohols etc.) should be avoided, since
these can attack the plastic cases.
Changingthe table insert
Please pay attention to the condition of the red plastic
table insert (see pos. 22 in the exploded drawing at the
end of this manual)! This must be in perfect condition. De-
formed and worn table inserts must be replaced. We offer
the table insert as aspare part for this.
Disposal:
Do not dispose of the device in the household waste! The
device contains materials that can be recycled. If you
have questions concerning this topic, please contact your
municipal disposal company or other appropriate munici-
pal institutions.
EC Declaration of Conformity
Name and address: PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: MBS 240/E
Article No.: 27172
In
sole responsibility, we declare that this product con-
forms to the following directives and normative docu-
ments:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 /05.20102
DIN EN 55014-2 /06.2009
DIN EN 61000-3-2 /03.2010
DIN EN 61000-3-3 /07.2012
EU MachineryDirective 2006/42/EC
DIN EN 61029-1 /01.2010
Date: 27.05.2013
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Appliance Safety Division
The CE document authorized agent is identical with the
signatory.
15
To Next Page
Loading...
