Need help?Do you have a question about the Proxxon FET and is the answer not in the manual?
General| Motor power | 200 W |
|---|---|
| Voltage | 230 V |
| Table size | 300 x 300 mm |
| Saw blade diameter | 85 mm |
| Weight | 6 kg |
| Frequency | 50/60 Hz |
| Speed | 7000 rpm |
Guidance on using the device correctly, preventing malfunctions, and PROXXON's liability limitations.
Specific safety rules for circular saw benches, including blade usage and protective equipment.
Ensuring protective covers are functional, correctly assembled, and reinstalled after use.
Guidelines for safe sawing processes, avoiding kickback, and using work aids.
Understanding kickback causes and implementing safety measures to prevent it.
Essential safety precautions for operating table saws, including setup and maintenance.
Overview of the FET table saw, its construction, and intended applications.
Identification of machine parts using figure 1.
Key technical specifications including speed, dimensions, power, and noise levels.
Instructions for unpacking, removing transport blocks, and opening the upper housing.
Guidance on securely fastening the saw to a stable surface.
Procedures for adjusting saw blade height for cut depth and tilting for mitre cuts.
Instructions for assembling and using longitudinal, angle, and auxiliary stops for precise cuts.
Key advice for achieving good sawing results, including feed, workpiece handling, and safety.
Guidance on choosing the appropriate saw blade for different materials and tasks.
Procedures for cleaning the exterior and interior of the saw unit.
Step-by-step instructions for replacing the toothed belt.
To Next Page
