17
Contents:
1. In general 17
2. Safety guidelines 17
2.1 Specific safety regulations for circular
saw benches 17
2.2 Safety guidelines regarding protective covers 18
2.3 Safety guidelines for sawing process 18
2.4 Kickback –Causes and corresponding safety
guidelines 19
2.5
Safety guidelines for operating table saws 19
3. Description of machine 20
4. Legend (fig. 1) 20
5. Technical data 20
6. Setting up the saw 21
6.1. Unpacking 21
6.2. Swinging open the upper housing part 21
6.3. Fastening the saw 21
6.4. Saw blade guard 22
6.4.1. Secure the saw blade guard with
the splitting wedge 22
7. Settings 22
7.1. Height adjustment of the saw blade 22
7.2. Adjusting the saw blade tilt 22
8. Extendable saw table 22
9. Dust suction 22
10. Working with the limit stops 23
10.1. Working with the longitudinal stop 23
10.2. Working with the angle stop 23
10.3. Auxiliary stop 23
11.Sawing 23
11.1. General tips on sawing 24
12. Changing the saw blade 24
12.1. Choosing the right saw blade 24
13. Maintenance and repairs: 24
13.1. Cleaning the housing 25
13.2. Cleaning the inside of the device 25
13.3. Replacing the toothed belt 25
14. Disposal 25
15. CE Declaration 25
1. In general
Dear Customer!
The use of these instructions
•makes it easier to become acquainted with the device,
•prevents malfunctions due to improper handling, and
•increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge of it and comply
with the instructions.
PROXXONwill not be liable for the safe function of the device for:
•handling that does not comply with the usual intended use,
•other application uses that are not stated in the instructions,
•disregard of the safety regulations.
Youwill not have any warranty claims for:
•operating errors,
•lack of maintenance.
For your safety,please comply with the safety regulations at all
costs.
Only use original PROXXON spare parts.
All rights reserved for further developments within the meaning of
technical progress. We wish you much success with the device.
WARNING!
Read all safety warnings and instructions. Failure
to follow all safety warnings and instructions listed
below may result in electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE!
2. Safety guidelines
2.1 Specific safety regulations for circular saw benches
•Donot use deformed or flawed saw blades.
•Replace worn bench inserts.
•Use only the saw blades recommended by Proxxon. Utilised
saw blades must comply with EN 847-1. The saw-cut may
not be smaller than the thickness of the splitting wedge.
•Make sure the saw blade is suitable for the material to be
sawn.
•Wear hearing protection!
•The sawdust from certain materials can be hazardous to
your health. Therefore, wear arespirator.
•Wear gloves when handling saw blades and rough materi-
als!
•Only operate the saw with adust suction device! Your saw
has aconnecting piece at the back for this purpose. Youcan
connect avacuum cleaner here.
•For smaller work pieces, use apush-rod for the feed!
•Never work with adevice that has faulty or defective parts.
Your circular saw might no longer be safe. Therefore, have
any damage immediately repaired by the Proxxon Customer
Service!
GB
Translation of the Original Operating Instructions
To Next Page
Loading...
