-12-
cutting
disc can cause recoil when cutting into gas
or water lines, electric cables or other objects.
Special safety guidelines on sanding:
a) Do not use any overdimensioned sanding disc pa-
pers, but comply with manufacturer’sspecifica-
tions on sanding paper size. Sanding papers that
extend beyond the grinding disc can cause injuries
as well as lead to binding, tearing of the sanding
discs or recoil.
For use in dryenvironments only
Protection class II device
Please do not dispose off the machine!
Wear safety glasses!
Description of the machine:
The user who frequently uses his long-neck angle grin-
der in cramped spaces will appreciate the device. A
slender shape, imposing power and acomprehensive
rangeofaccessories make the LHW the ideal tool for
deburring, rough-machining, precision polishing, ro-
unding off edges, colour removal, removing rust, sepa-
rating small parts and sharpening of tools. The LHW
can easily machine many materials, such as for exam-
ple steel, non-ferrous metals, glass, wood and cera-
mics. Ideally suited for model, tool and mould con-
struction, but also, for example, in the motor vehicle
sector or for repairs to vehicles.
The deflection is achieved through the precise, double
ball-bearing bevel gear.Itisdriven by apowerful spe-
cial motor which is efficiently force-cooled against
overheating. Asanding disc of high-grade corundum
(grit 60), afan sander (grit 100) and afabric-reinforced
cutting disc are included.
Key
1. Locking button
2. ON-OFFswitch
3. Unit handle
4. Connection cable with mains plug
5. Protective guard
6. Grinding disc
Technical Data
Motor:
Voltage 230 V, 50/60 Hz
Output power 100 Watt
Unit:
Rotational speed 15000 rpm
Disc diameter 50 mm
Length 250 mm
Weight approx. 700 g
Generated noise ≤ 78 dB (A)
Vibration at the handle ≤ 2.5 m/s
2
Please note that the sound and vibration measurements
in particular have been performed with Proxxon bits and
cutters. When using third-party brands we cannot gua-
rantee compliance with the statements given here!
Commissioning and operation
General handling of the device:
CAUTION!
•Donot work with damaged or worn bits and cutters!
Make sure the tools are in perfect condition. Damaged
or worn tools can break and cause injuries!
•Never press the lock button if the bits and cutters and
are still rotating.
•Please note: The utilised bits and cutters may not ex-
ceed amaximum diameter of 50 mm!
•Make sure that the permissible maximum speed of the
bits and cutters does not undershoot the speed of the
device! The tool can break when the maximum per-
missible speed is exceeded. Flying parts can cause da-
mage and severe injuries!
•Never work without dust protection mask and safety
glasses.Some dusts have ahazardous effect! Materi-
als containing asbestos may not be machined!
•Donot work with damaged tools!
•Ensure the work piece is fixed securely! Loose work
pieces should be clamped in asuitable fixture. This
prevents the work pieces from flying about.
•Acorrect and uniform speed achieves ahigh grinding
performance, not excessive contact pressure! Exces-
sive pressure is to be avoided: it only stresses the de-
vice and can even damage the bits and cutters!
•Hold the device without covering the ventilation slots.
To Next Page
Loading...
