PS Automation PS-AMS PSQ Series User Manual

11
Figure 12: Wiring diagram for wiring to the terminal box
Ab
Figure 13: Electric terminals with local control PSC.2 with 3-phase AC
Caution: Please observe the supply voltage and the maximum power consumption of the actuator as indicated on
the actuator‘s name plate!
Close the cover of the actuator: Close the cover of the terminal box:
Figure 14 : Close the cover
After wiring is completed, put on the cover
properly, tighten the 4 screws crosswise, and
tighten the cable glands. After connecting all the required wires, tighten the
modules again and put on the cover properly.
Tighten the 4 screws crosswise, and tighten the
cable glands.
Caution: Close cover and cable glands properly to ensure enclosure as per the specified rating (IP67 or IP68).
Wiring of Protective Earth (PE) has to be
made to terminal 24!
Figure 15: Close the cover

PS Automation PS-AMS PSQ Series Specifications

General

Brand	PS Automation
Model	PS-AMS PSQ Series
Category	Controller
Language	English