How to fix Pt Platinum Lighting Equipment flash head that won't turn on?
If your Pt Platinum Lighting Equipment flash head isn't turning on, ensure the power cord is correctly plugged into a working outlet and that the power switch on the back of the flash head is turned on. If you're using a remote trigger, verify its power cord is connected correctly and the power LED on the remote receiver is blue. Also, check the fuse and replace it if needed.
What to do if picture is too dark with Pt Platinum Lighting Equipment?
If your picture is too dark when using Pt Platinum Lighting Equipment, try increasing the flash brightness. Consider using both flash heads, reducing the distance between the flash and the subject, and adjusting the exposure on your camera.
Why does my picture look bleached out with Pt Platinum Lighting Equipment?
If your picture looks bleached out when using Pt Platinum Lighting Equipment, try decreasing the flash brightness. You can also use an umbrella or softbox to soften the light from your flash head, adjust the distance between the flash and the subject, or adjust the exposure on the camera.
How to troubleshoot Pt Platinum Lighting Equipment remote trigger not working?
If the remote trigger isn't activating the flash on your Pt Platinum Lighting Equipment, check that the blue light on the remote receiver is on, ensuring the power cable is correctly and securely connected. Press the button on top of the remote transmitter; the blue light on the remote receiver should briefly turn red. If it doesn't, replace the transmitter battery (type 23A alkaline battery). Also, make sure the four switches on the transmitter and receiver are set identically (typically all ON). Finally, RF interference from devices like microwaves may be the cause, so turn off such devices or move the flash.
Why doesn't my Pt Platinum Lighting Equipment flash change the lighting in pictures?
If using your Pt Platinum Lighting Equipment flash doesn't seem to change the lighting in your picture, it might be because your camera has a pre-flash feature. To resolve this, press the SLAVE button one or more times to select the Anti-preflash mode, indicated by a red slave indicator light. Alternatively, use the remote trigger or PC sync cable to connect your flash to your camera.
What to do if Pt Platinum Lighting Equipment flash fires late or not at all?
If your Pt Platinum Lighting Equipment flash goes off too late or not at all, it might be because the light sensor on your flash does not have a clear line-of-sight to the camera’s flash, or the camera’s flash is weak. Move your flash to provide a clear line-of-sight. Alternatively, use the remote trigger or PC sync cable to let the camera control your flash. Also, ensure that the red light sensors on the tops of the flash heads are not under bright lights or in sunshine.
What does it mean if Pt Platinum Lighting Equipment display flashes a non-numeric code?
If your Pt Platinum Lighting Equipment display flashes a non-numeric code, it indicates a failure mode, often due to overheating from repeated use in a short time. Allow the flash head to cool down for 10-15 minutes, then turn the power off and on again to test the flash.
How to fix Pt Platinum Lighting Equipment modeling lamp that won't turn on?
If the modeling lamp on your Pt Platinum Lighting Equipment does not turn on, unplug the power cord and ensure the lamp is secure in its socket. If secure, remove the lamp and test it in a standard lamp socket; if it doesn't turn on, replace the lamp.
What to do if Pt Platinum Lighting Equipment softbox won't rotate?
If the softbox on your Pt Platinum Lighting Equipment will not rotate, turn the power off, remove the softbox cover, and loosen the locking knob (silver thumb screw). Turn the softbox to the desired position, then tighten the knob and replace the softbox cover.
Allows adjustment of the vertical or horizontal position of the flash head.
Controls the intensity of the flash lamp, adjustable from 1.0 to 3.0.
Wirelessly fires the flash using a remote transmitter and receiver system.
General| Brand | Pt Platinum |
|---|---|
| Model | PT-DPSFK |
| Category | Lighting Equipment |
| Language | English |
To Next Page