You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and
assembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
Keep bystanders, children, and visitors away while operating the Brake Bleeder/
Vacuum Pump. Distractions can cause you to lose control. Protect others in the
work area from injury. Provide barriers or shields as needed.
1. Stay alert. Watch what you are doing, and use common sense when operating
the Brake Bleeder/Vacuum Pump. Do not use the tool while tired or under the
inuenceofdrugs,alcohol,ormedication.Amomentofinattentionwhile
operating the tool may result in serious personal injury.
2 Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and jewelry away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.
4.
Usesafetyequipment.AlwayswearANSIapprovedsafetyglassesunderneath
a full face safety shield. Nonskid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
1. Maintain a safe working environment. Keep the work area well lit. Make sure
thereisadequatesurroundingworkspace.Alwayskeeptheworkareafreeof
obstructions, grease, oil, trash, and other debris. Do not use the Brake Bleeder/
VacuumPumpinareasnearammablechemicals,dusts,andvapors.Donot
use this product in a damp or wet location.
2.
Maintain labels and nameplates on this product. These carry important information.
If unreadable or missing, contact Performance Tool for a replacement.
3.
KeeptheHandlesoftheBrakeBleederdry,clean,andfreefrombrakeuid,oil,andgrease.
4.
Prior to using the Brake Bleeder/Vacuum Pump make sure to read and understand all
warnings,safetyprecautions,andinstructionsasoutlinedinthevehiclemanufacturer’s
instructionmanual.Everyvehiclehasspecicmeasurementvaluesforvacuumrelated
readings. It is beyond the scope of this manual to properly describe the correct
procedure and test data for each vehicle.
2
SPECIFICATIONS
Gauge Size ..........................................................................2 in. Diameter
Gauge Scale ......................................... 0,-.30/Hg (0,-.76 cm/Hg) Vacuum
Net Weight ....................................................................................... 1.8 lb.
Specifications are subject to change without notice.
GENERAL WARNINGS
SAVE THIS MANUAL
PERSONAL SAFETY
PRODUCT WARNINGS