21
21
22
22
22
23
Service functions
Map settings
Voice settings
Speed settings
Version upgrade
Advanced settings
Parking instructions
Product Maintenance
24
24
24
24
25
26
27-32
Troubleshooting
After-sales Service
Disinfection component, drive wheel and auxiliary wheel
Sensors
Robot body maintenance
Handling of robot
Sign maintenance
Instructions for use
Safety Instruction
1. DO NOT block the port of disinfectant spray, and DO NOT put anything into the port.
2. DO NOT drag the robot during the disinfection task, if necessary, tap the screen, and
then push it after the pause, the disinfection mode pauses for 20s, and the robot will
automatically resume moving after the pause.
3. DO NOT press hard on the screen or tap the screen.
4. DO NOT push the robot backwards while the robot is powered on
5. If the robot enters the wrong position due to factors such as blockage, please pause the
task and push it to the correct route to continue the task.
6. In the event of a collision, please cancel the current task or pause, re-enter the task, DO
NOT artificially block the robot.
7. The top camera is used for precise positioning of the robot, DO NOT block it with a cover
during starting and running.
8. DO NOT tap or make other actions to the robot, otherwise it may easily cause
equipment damage.
9. During a disinfection task, the atomized disinfectant may be harmful to the human
body, therefore, during the operation of the robot, it is necessary to wear protective
equipment such as masks and goggles.
3 4
To Next Page
Loading...
Need help?
General
