16
DAILY MAINTENANCE
3. REPLACING THE SQUEEGEE RUBBERS
Check the condition of the squeegee rubbers. Replace as necessary. To replace the
rubbers:
1.
Lift the squeegee
2.
Remove the two knobs
3.
Detach the squeegee from the support
4.
Remove the tube from the squeegee opening to permit the squeegee to be
removed
5. Unscrew the squeegee knobs that clamp the blades and pull them out
6. Remove the blades
7. Replace the rubbers
8. Reinstall everything by performing these procedures in reverse
4. BRUSHES DISASSEMBLY
1. Lift the squeegee
2. Lift the machine by pressing down on the handlebar
3. With the base lifted, jog the brush control. The brush releases automatically
ATTENTION:
Make sure there are no objects or
persons in he vicinity of the brush when doing this
operation
To Next Page
Loading...
