Pullman Holt Gloss Boss - Checking Operation; Electric System Safety; Insufficient Water on the Brushes; The Machine Does Not Clean Well

19
BRUSH SELECTION AND USE
POLYPROPYLENE BRUSHES (PPL)
These are used on all types of floors and offer goods resistance to wear and to hot water (not more than 140°F). PPL is not
hygroscopic and consequently preserves its characteristics even when wet.
DRIVE DISKS
Drive disks are recommended for cleaning polished surfaces.
There are two types of drive disk: type CENTER LOCK which has a plastic snap-in center lock system, that permits perfect
centering of the abrasive disk and ensures it is kept anchored without detaching:
1. with sets of anchor stubs that retain and drive the abrasive disk during operation.
2. with sets of bristles locks that retain and drive the abrasive disk during operation.
BRUCH SELECTION TABLE
Machine
Nof
Bh
Code Type of Bristle
VISPA 1
421701
422213
422001
PPL
Drive disk - anchor
Drive disk – bristle