Pullman WD20LSSO User Manual

1. Disconnect latches on side of machine and remove
the canister lid.
2. Remove blue plastic cover inside and underneath
the tank.
3. Install castor wheels into the hole on the base and
push hard to secure the wheels.
ASSEMBLY
The cleaner should be switched off and disconnected from the mains power supply before you start
to assemble.
4. Replace the canister lid (with the power cord facing
the opposite direction of the hose inlet) and connect
the latches.
6

Pullman WD20LSSO Specifications

General

Brand	Pullman
Model	WD20LSSO
Category	Vacuum Cleaner
Language	English