Time
Time setup
= Press and hold down the М (3) button to enter the
main menu.
= Select option «Settings» with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
= Select option «Time« with UP/DOWN.
= Select hour value with a short press of the UP/
DOWN buttons.
= Select minute value with a short press of the UP/
DOWN buttons.
= Save selected date and exit the submenu with a
long press of the M button.
= Switch to hour setup with a short press of the M
button.
= Press briefly М to confirm.
= Select the desired time format with a short press
of the UP/ DOWN buttons: 24 or PM/AM.
= Switch to minute setup with a short press of the M
button.
Units of
measure
M
Y
= Select option «Settings» with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
Selection of units of measurement
= Press and hold down the М (3) button to enter the
main menu.
= Select option «Units of measure« with
UP/DOWN.
= Press briefly М to confirm.
= Select the desired unit of measurement – metres
or yards – with UP/DOWN. Press briefly М to
confirm.
= Ex it to se tti ngs s ubm enu ta kes p lac e
automatically.
= Date format is displayed as: YYYY/MM/DD
(year/month/day)
= Switch between digits with a short press of the M
button.
= Select the correct values for the year, month and
date with a short press of the UP/ DOWN buttons.
= Save selected date and exit the submenu with a
long press of the M button.
Reset
= Select option «Settings» with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
= If «No» is selected, action is aborted and you
return to the submenu.
= Calibration mode – automatic
= Wi-Fi – off (default password)
= Unit of measurement – metric
= Confirm selection with a short press of the M
button.
= Unit’s operating mode – Forest
Restore default settings
= Colour palette – White Hot
= Magnification – off (no digital zoom)
= With a short press of the UP/ DOWN buttons
select «Yes» to restore default settings or «No»
to abort.
= Press and hold down the М (3) button to enter the
main menu.
= Select option «Reset« with UP/DOWN. Press
briefly М to confirm.
= If «Yes» is selected, display will show «Return
default settings?» and «Yes» and «No»
options. Select «Yes» to restore default settings.
The following settings will be restored to their
original values before changes made by the user:
= Operating mode of video recorder – video
= Language – English
= PiP – off
Warning: date and time settings, default pixel map
and remote control activation are not restored.
Format
= Select option «Settings» with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
Formatting
This menu option allows you to format your device's
Flash card or memory card (erase all files from its
memory).
= Press and hold down the М (3) button to enter the
main menu.
16
15
To Next Page
Loading...
