EasyManuals Logo

Pulsar Accolade XP50 Operating Instructions

Pulsar Accolade XP50
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
14
= Full name
This option allows the user to view the following
information about the device:
= SKU number
= serial number
= software version
Device
information
= hardware version
= service information
Select menu option Device information with a short
press of the M button to review information.
The status bar is located in the lower part of the display and shows
information on the actual operating status of the device, including:
x16A
16x
12:30AM
A
1 2 3 4 5 76
(1) Colour palette
(5) Wi-Fi connection status
(2) Operating mode
(6) Running time
(4) Current full magnification (for example, 16x)
External battery power indicator
(if the device is powered by the Battery Pack) or
(if the device is powered by an external power supply)
(3) Calibration mode
(in the automatic calibration mode, three seconds before automatic
calibration a countdown timer 00:01 is shown in place of the calibration
mode icon).
(7) Battery charge level
(shown only if the «Black Hot» palette is selected)
STATUS BAR
VIDEO RECORDING AND PHOTOGRAPHY
ACCOLADE thermal imaging binoculars feature video recording and
photography of the image being ranged to the internal memory card.
Before using this feature please read the menu options «Date setup»,
«Time setup» of the section «Main menu functions».
The built-in recorder operates in two modes – VIDEO and PHOTO
VIDEO mode. Video recording
The device in the VIDEO mode upon turning on.
In the top left corner you will see icon and remaining recording
time 5:12.in the format HH:MM (hours: minutes)
Start video recording with a short press of the REC (4) button.
Upon start of video recording icon disappears, and icon REC and
recording timer in the format MM:SS (minutes : seconds) appear
instead:
Pause and resume recording video with a short press of the REC
button.
Stop recording video with a long press of the REC button.
Video files are saved to the memory card after stopping video.
Switch between modes (Video-> Photo-> Video) with a long press of
the REC button.
REC 00:25
Photo mode. Photography
Take a picture with a short press of the REC button. The image
freezes for 0.5 sec and a photo is saved to the internal memory.
in the top left corner of the display you can see: photography icon ,
«>100» means that you can take more than 100 pictures. If the
number of available pictures is less than 100, actual amount of
available pictures (for example 98) is shown next to the icon .
Switch to the Photo mode with a long press of the button. REC
you can enter and operate the menu during video recording;
– recorded videos and photos are saved to the built-in memory card
in the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx
three-digit counter for videos and photos;
- counter for multimedia files cannot be reset;
Notes:
20
19

Other manuals for Pulsar Accolade XP50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Accolade XP50 and is the answer not in the manual?

Pulsar Accolade XP50 Specifications

General IconGeneral
Objective Lens Diameter50 mm
Display TypeAMOLED
Pixel Pitch17 µm
Frame Rate50 Hz
Video/Photo RecordingYes
Built-in Memory16 GB
Wi-FiYes
Eye Relief15 mm
FogproofYes
Operating TimeUp to 8 hours
Power Supply3V
Battery Life8 hours
Operating Temperature+50°C
Battery TypeB-Pack (changeable battery packs)
Weight900 g

Related product manuals