10
Levels Explained
Power Levels
There are 5 available level options:
Level 0 - STOCK
Level 1 - ECONOMY
Level 2 - HEAVY TOW
Level 3 - DRIVE / LIGHT TOW
Level 4 - PERFORMANCE
Level 5 - EXTREME
Changing Power Levels
STEP 1 - Start the engine.
NOTE: Cruise Control cannot be active during power level changing. If Cruise
Control is active, the left keypad cannot control the Pulsar module.
STEP 2 - Press the Cancel button on the left keypad, the speedometer spindle
should immediately move to the currently set Power Level
STEP 3 - Use the RES+ and the SET- buttons to adjust Power Level, RES+ to
increase and SET- to decrease.
To exit, simply wait 3 seconds for it to time out. Changes are instantly
saved as they are adjusted.
Level 5 = 50
Level 4 = 40
Level 3 = 30
Level 2 = 20
Level 1 = 10
Level 0 = 0
To Next Page
Loading...