Pulsar LT - TPMS - Tire Pressure Monitor System; Tire Size

14
STEP 5 - Front tire set point.
a. Using the +RES or -SET wheel to adjust to the desired value
between 40 and 99 (PSI)
b. Press the cancel cruise control button to save the input value.
c. Speedometer will move to rear set point value.
STEP 6 - Rear tire set point.
a. Using the +RES or -SET wheel to adjust to the desired value
between 40 and 99 (PSI)
b. Press the cancel cruise control button to save the input value.
STEP 7 - The speedometer will sweep to 140 MPH indicating the function is
complete.
Input Stock and Modied Tire Size.
STEP 1 - Access the Programming Menu.
STEP 2 - Using +RES or -SET, select mode 30 (MPH)
STEP 3 - Press cancel cruise control to select.
NOTE: The tire size adjustment feature is only for vehicles with
aftermarket tires that are larger or smaller than factory. If your vehicle
has a factory sized tire, please skip this feature.
STEP 1 - Access the Programming Menu.
STEP 2 - Using +RES or -SET, select mode 20 (MPH)
STEP 3 - Press cancel cruise to select.
STEP 4 - Speedometer sweeps to 140 MPH for 3 seconds
indicating TPMS has been selected.
TPMS - Tire Pressure Monitor System
After adjusting the TPMS inate to number, the min and max values
automatically adjust. This mode reprograms the vehicle ECM.
Tire Size