Pulsar PG5250B - Assembly; Unpacking; Packing List

9
ASSEMBLY
Unpacking
1. Place box on a level surface.
2. Remove all items from box except the generator. Make sure all items listed on the packing list are included and not
damaged.
3. Cut down the sides of box being careful to avoid hitting the generator.
4. Leave generator on box to install wheel assembly.
Description Qty
Handles
Screw
Nut
1
4
4
Wheels
2
Hair pin
2
Axles
2
Packing List
Check all loose parts to the following list. Contact your dealer if any loose parts are not included.
Description Qty
Generator
1
Operator’s manual
1
Product registration card
1
Toolkit
Spark Plug Wrench
1
1
Washer
2
Description Qty
Supporting Leg
Screw
Nut
Propnae Hose
2
2
2
1
Funnel
+ +
+
+ ++ +
( )
++ +
+ + +
Handle Assembly Wheel Assembly
Foot Assembly