Pulsar W880 - WEATHER MODE; Barometric Pressure and Temperature Display

34
English
35
English
ALARM MODE
Press until the watch enters the ALARM mode.
Alarm channel
Alarm mark
A
The alarm has 7 channels: the Alarm 1 to 4 are the TIME alarm, the Alarm 5
and 6 are the ALTIMETER alarm, and the Alarm 6 is H2O alarm.
E
Press to select the desired alarm channel (from 1 to 4).
TIME ALARM SETTING
C
s
Keep holding down for 2 seconds to show the ALARM SETTING
display.
s
Press to select the digits to be adjusted (hour/minute).
A
s
Press to increase the digits (+).
Press to decrease the digits (-).
D
E
s
C
Press to conrm the alarm setting.
“ON” and the alarm mark appear and the alarm is automatically
engaged.
E
C
D
B
A
E
C
D
B
A
“ADJUST HOLD” is shown,
and the watch enters the
ALARM SETTING mode.
The hour digits start flashing.
or