What to do if Pure Clean Vacuum Cleaner cliff sensor or bumper sensor fails?
If you're experiencing a cliff sensor or bumper sensor failure with your Pure Clean Vacuum Cleaner, clean the cliff sensor and gently shake the bumper. Check for any foreign matter that might be obstructing the sensors.
Covers usage, power, adapter, wet hands, flammables, cords, environment, and battery disposal.
States that children or those with limited experience need supervision.
Lists the main components and accessories included with the robot vacuum.
Diagrams illustrating the different parts of the robot vacuum.
Details the charging base and the remote control components.
Explains the various display indicators and their meanings during operation.
Describes the functions of each button on the remote control.
Step-by-step guide to initial setup and charging the robot.
Instructions on how to start, pause, and put the robot into sleep mode.
How to set a cleaning schedule for the robot.
Explains different cleaning modes like Auto, Spot, and Edge.
Instructions for cleaning and replacing the robot's side brushes.
Guide on how to clean and maintain the dust bin and filters.
How to clean cliff sensors and auto charging pins.
Lists common error codes, their causes, and solutions.
General| Type | Robot Vacuum Cleaner |
|---|---|
| Model | PUCRC90 |
| Suction Power | 1800 Pa |
| Battery Life | 120 minutes |
| Navigation | Smart Navigation |
| Filters | HEPA Filter |
| Power | 30W |
| Filter Type | HEPA Filter |
| Dustbin Capacity | 0.6 L |
| Dust Capacity | 0.6 L |
| Cord Length | Cordless |
| Charging Time | 5 hours |
To Next Page
