NO. Tone Cause Solution
01
02
03
Wheels don’t work
Check the wheels
or side brushes
Cli sensor or bumper
sensor failure
Clean cli sensor and
shake bumper slightly,
check if there’s
foreign matter
Main body gets stuck
Move main body
and start again
11
www.PyleUSA.com
Troubleshooting
1. ERROR CODE SHEET
When the robot meets with some routine troubles, it will remind you by a
beep.
• Short tone
NOTE: If all above solutions don’t work, please take below actions.
1. Reset the robot by re-turning on the power switch.
2. If reset action doesn’t work, please send the robot to seller for repairing.
REMARK:
The storage temperature of this product is -68°F to 140°F
To Next Page
Loading...
