Set-up & Care Guide
4
2. 3.
The metal basket support is already attached.
You can adjust it by loosening the front wheel nuts
a little to move the support to the correct position
under the basket if you need to. Remember to
tighten the nuts when you’re done.
Position the metal plate against the basket
support to hold it to the underside of the basket.
Thread the bolts in from the top, and tighten
evenly so that the plate has even gaps each
side, then tighten fully. Use the nuts provided to
tighten up against the plate*.
Pure Free Step – Securing the front light
(Outside View)
* NOTE: Check the bolts securing the basket aer the rst few rides and periodically aerwards. Bolts may loosen in use and pose a risk of
the basket moving or becoming detached, causing loss of contents and a potentially serious accident for you and/or other road users.
To Next Page
Loading...
