Pure Free E-Bike
1
SPARES
PACK
BIKE BOX
3. 4.
With the bolts still not fully tightened (loosen
them a little if you need to), adjust the height
of the stem, ensuring that the maximum height
marker is not showing.
Line up the handlebar with the wheel facing
directly forward, so that from above the bar is at a
90° angle to the front wheel.
2.1.
Ensure that the stem bolts are in place. They
shouldn’t be fully tightened yet.
Remove the e-bike and the spares pack from
the box*.
* We strongly recommend that you keep the main box and
packaging for at least 30 days in case you need to return the
e-bike.
Setting up your new e-bike
Our technicians have thoroughly checked and assembled your new e-bike, packing it carefully inside
the box. It’s almost ready to ride – just follow the easy instructions below, charge up your battery, pump
up your tyres, and you’ll be ready to go!
To Next Page
Loading...
