PURE Juicer - Page 13

ADDITIONAL
NOTE
1B1A
2A 2E2D2C2B
13
Every eort has been made to deliver
the machine to you in a perfectly clean
state. However, PURE recommends
pre-washing all food contact parts
prior to use with soap and water.
1. Install cutter:
a. Align the cutter flats to flats on the motor shaft
b. Press the cutter onto motor shaft until the cutter and motor shaft are flush
2. Attach the oset feed tube:
a. Align the attachment marks on the feed tube and the mounting hub.
b. Engage the cleats on the feed tube with the slots on the
mounting hub.
c. Rotate clockwise until the lock tab locks in place with a clicking sound.
d. Confirm the feed tube is locked vertically in place.
e. If the feed tube can be rotated back to 11 o’clock it is not locked;
repeat steps a-e until the feed tube is locked. Do not operate if
it is unlocked.