4
• Ensure the inverter negative DC input terminal or the battery negative
terminal is connected to earth ground if the inverter is used outside your
vehicle.
• Do not install in the engine compartment—install in a well-ventilated
area.
• Do not use with positive grounded electrical systems (the majority of
modern vehicles use negative grounded electrical systems).
• Observe correct polarity when connecting the inverter DC input
terminals to the battery. Connect the battery positive to the positive
input connector of the inverter and the battery negative to the inverter
negative input terminal. A reverse polarity connection will result in a
blown fuse and may cause permanent damage to the inverter. Damage
due to reverse polarity is not covered under warranty.
• Do not use the inverter if it is wet.
• Do not connect in parallel with another AC source.
• Disconnect appliance plug from inverter AC outlet before working on
the appliance.
• e metal chassis of the inverter and the ground terminal of the outlet(s)
are internally connected to the negative battery terminal on the inverter.
is means the metal chassis of the inverter and the AC load will
automatically be grounded.
• is inverter will not run high wattage applications that exceed the
output power limit or the surge power limit.
GENERAL CAUTIONS
To reduce the risk of re, electric shock, explosion or injury:
To Next Page
Loading...
