PV Powered Grid-Tied - Appendix A - Specifications; Table A-1 PVP1100 through PVP2800 Specifications

24
Appendix A - Specifications
The specifications detailed below are expected operational parameters, and should be used
in designing your PV system in accordance with the NEC.
Specifications PVP1100 PVP2000 PVP2500 PVP2800
Maximum DC Input Voltage (VOC) 500VDC
DC Voltage Operating Range (V)
115VDC-
450VDC
115VDC-
450VDC
140VDC-
450VDC
180VDC-
450VDC
DC MPPT Range (V)
115VDC-
380VDC
115VDC-
380VDC
140VDC-
380VDC
180VDC-
380VDC
DC Imp Maximum Current (A) 10A 18A 20A 18A
DC Isc Maximum Current (A) 26A
AC Operating Range (V)
105.6V-
132.5V
211V-
264V
211V-
264V
183V-
229V
AC Frequency Range (Hz) 59.3Hz-60.5Hz
AC Nominal Voltage (V) 120V 240V 240V 208V
Normal Output Frequency 60Hz
Synchronization in Rush Current < 2.0A 8.4A < 2.0A
Power Factor 0.99 - 1.0 at > 50% Power
AC Maximum Continuous Current (A) 10A 9A 11A 13A
Continuous Output Power (Watts) 1100 2000 2500 2800
Maximum Continuous Output Power
(Watts)
1100 2000 2500 2800
Enclosure Steel- NEMA 3R to UL 50 Standards
Dimensions (H x W x D)
With PV System Disconnect (H x W x D)
22 1/2” x 15 5/8” x 8 1/4”
30 3/8” x 15 5/8” x 8 1/4”
Weight (lbs) 55 65 70 80
Cooling Natural Convection - Heat Sink
Relative Humidity 0% to 100% Condensing
Ambient Temperature Range -25°C to + 40°C
Environmental Rating NEMA 3R
Listings UL 1741, IEEE 1547, IEEE 519, IEEE 929, IEEE 620
Table A-1 PVP1100 through PVP2800 Specifications
APPENDIX A