1
1. Introduction and Safety
Introduction1.1
The PV Powered Grid-Tied Inverter is a utility interactive inverter for photovoltaic
(PV) systems.
The inverter is tied to an electrical source provided by the local utility company as well as
the PV system. The inverter contains everything needed to convert the DC energy generated
by the PV array(s) into AC energy required to power a house.
This manual provides information necessary for the successful installation and use of the
PV Powered Grid-Tied Inverter.
General Safety1.2
IMPORTANT SAFETY INSTRUCTIONS: This product has been engineered and
manufactured to ensure your personal safety. Improper use may result in potential electrical
shock or burns. Read and follow all instructions for installation, use and servicing of this
product. Read all safety warnings before installing or operating the inverter.
NOTE: A locking tab has been designed into the PV Powered Grid-tied Inverter. Locking
the inverter is the sole responsibility of the end user. Secure the lid to prevent
unauthorized access or damage to the inverter.
SAVE THESE INSTRUCTIONS: This manual contains important instructions for the PV
Powered Grid-Tied Inverter that must be followed during installation of the PV Powered
Grid-Tied Inverter.
INSTRUCTIONS IMPORTANTES CONCERNANT LA SECURITÉ CONSERVER CES
INSTRUCTIONS. CETTE NOTICE CONTIENT DES INSTRUCTIONS IMPORTANTES
CONCERNANT LA SÉCURITÉ.
!
CAUTION
All electrical installations should be done in accordance with local s
electrical codes and the National Electrical Code (NEC), ANSI/NFPA 70.
Before connecting the inverter to the electrical utility grid, your utility s
company must grant approval. Only qualified electricians should make the
connection.
When exposed to light, PV arrays form electrical energy that creates a s
potentially hazardous condition. To avoid this, completely cover the surface
of all PV arrays with opaque (dark) material before wiring them.
The inverter contains no user-serviceable parts. Refer maintenance to s
qualified service personnel.
INTRODUCTION
& SAFETY