• Press and hold the desired preset button (numbered 1-6 on the face of the radio)
for more than 2 seconds to save the station to that preset number.
To recall a preset station
• Select the desired band.
• Briey press a preset button (numbered 1-6) to recall the corresponding preset
station.
Automatic Store station/ Preset station scan (AMS)
Press and hold the AMS button for more than 2 seconds to select six strong stations
and store them in the current band. The radio will automatically scan the current
frequency and enter the six strongest stations into the preset memory positions for
that band. Briey press the AMS button on the remote control to recall each preset
station that saved in the memories in each band.
LOCAL/DX
In urban areas, most stations are strong enough and “LOCAL ON” mode should be
selected. Switch to LOCAL OFF mode to search for stations with weaker signals.
Press the LOC button on the remote control to choose local or distant reception
mode.
STEREO/MONO
FM station is received in stereo mode. However, if the signal is weak or reception is
not as good as you would like, switching to MONO mode usually improves the
overall sound quality. Press the ST button on the remote control to choose FM
STEREO or MONO audio eect.
USB OPERATION
Insert USB
To play les from a USB device, open the USB port cover and insert the USB device
into the port, the songs will begin to play automatically.
To Next Page
Loading...
Need help?
General
