Please refer to this picture, connect the camera with the PC via the USB cable to
charge it. The battery charging status can be seen from the LCD icon (power-on
charging) or from the indicator lights (power-off charging), while charging, the LED
is shining blue, when fully charged, the LED will turn off.
II. Basic Operation
1. Power on
Press and hold the “Power on/off” button to turn on the camera; after it’s
powered on, it will enter the recording standby mode.
2. Power off
In the boot state, Press and hold “Power on/off” button for 3 seconds to
turn off the camera; the LCD will turn off.
To Next Page
Loading...
Need help?
General
