5. Photo
In the power on standby mode, press “Photo” button to take a picture and the
picture will be save, camera return back to standby state. Each press the photo
button, the camera will take one picture and save to SD card.
6. Audio only
In the boot state, press “Audio” button to start recording audio, the display
will be blue and there is a sound recording icon, press “Audio” button again to stop
recording, the audio file will be saved to SD card automatically, display will return
to standby state.
7. Infrared mode
After booting, the infrared is off by default, filter switch is color, suitable for
daytime use. At nighttime, press “Infrared” button to turn on the infrared lights,
the filter will switch to black and white, suitable for nighttime use. In the power
on standby state, press “Infrared” button to enter infrared mode, six infrared lights
will turn on; Press the “Infrared” button again, exit the infrared mode, standby
display or video recording display return to be color.
8. File playback and delete
1. Press and hold “OK” button to enter “Playback” mode, press ”Confirm”
button to start playback the videos, audios and photos, press “Up” and “Down”
button to choose the file. Press “OK” button, enter the menu list, press
To Next Page
Loading...
Need help?
General
