Pyle PSBV250BT User Manual

11
Aux/Mp3 Link/Optical Operation
1 Ensure that the unit is connected to the TV or audio device.
2 While in ON mode, press the
/SOURCE button repeatedly on the main unit or the
SOURCE button on the remote contro to select AUX or MP3 LINK or OPTICAL Mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
Play with Bluetooth Device
You can listen to tracks from a media device if connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to
this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8
meters (without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s
capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
/SOURCE button repeatedly on the unit or the SOURCE
button on the remote control to select Bluetooth mode. The Bluetooth indicator will flash
slowly.
2 The system has entered pairing mode.
- Or press the PAIR button on the remote control to be searchable. The Bluetooth indicator
will flash rapidly.
3 Activate your Bluetooth device and select the search mode. “PSBV250BT” will appear on
your Bluetooth device list.
4 Select “PSBV250BT” in the pairing list. The Bluetooth indicator will light up solidly while the
pairing succeeds.
5 To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.
Tips:
1 Enter 0000 for the password if necessary.
2 If there is an existing connection, press the PAIR button on the remote control to re-activate
the pairing mode, the connection will be interrupted.
3 If no other Bluetooth device pairs with this player within two minutes, the player will
recover its previous connection.

Pyle PSBV250BT Specifications

Power

power requirements	AC 120V 60Hz
power consumption	20 W
output power	20 W x 2

Audio Specifications

total harmonic distortion	1% (1kHz, 1W)
audio input sensitivity	700 mV
frequency response	40Hz - 20KHz

Weight and Dimensions

width	806 mm
height	62 mm
depth	60 mm