EasyManua.ls Logo

Pylon Technologies RT12100G31 - Safety Precautions; Reminding

Pylon Technologies RT12100G31
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Label for Waste Electrical and Electronic Equipment (WEEE)
Directive (2006/66/EC) and its amendments
The certificate label for Bluetooth SIG
The Bluetooth Certification Mark for Janpanese market.
The TUV Mark certificate label for Safety Testing (EN62619)
by TÜV Rheinland
The cTUVus Mark certificate label for Safety Testing
(UL1973) and Functional Safety (IEC60730-1/UL60730-1)
by TÜV Rheinland
2. Safety Precautions
Reminding
1) It is important and necessary to read the user manual carefully (in the
accessories) before installing or using battery. Failure to do so or to follow
any of the instructions or warnings in this document can result in
electrical shock, serious injury, or death, or can damage battery,
potentially rendering it inoperable
2) If the battery is stored for long time, it is required to charge them every six
months, and the SOC should be no less than 90%
3) Battery needs to be recharged within 12 hours, after fully discharged
4) Do not install the product in outdoor environment, or an environment out
of the operation temperature or humidity range listed in manual.
5) Do not expose cable outside