5
3.1 Features
1) Products with strong environmental adaptability, structural reliability and
electrical reliability, able to adapt to the harsh automotive environment.
2) Robust power performance. Available for 1C-rate continuous operation
and upto 2C-rate instantaneous discharge.
3) Support both serial and parallel connections. Up to 16 batteries (max. 4
groups in serial) can be connected together per single system.
4) The battery module with low self-discharge loss can be stored for more
than 6 months during normal condition and more than 2 months during
empty condition.
5) Built-in battery management system, supporting intelligent monitoring
via CANBUS/Bluetooth.
6) Cathode material is made from LiFePO4 with safety performance and long
cycle life
7) Battery management system (BMS)has protection functions including
over-discharge, over-charge, over-current, short circuit and high/low
temperature.
8) The system can automatically manage charge and discharge state and
balance voltage between each cell.
9) The size is compatible with the US BCI G31 standard and can completely
replace lead-acid batteries of the same size.
10) Build-in heating film which will automatically heat up the module during
minus temperature for critical environment operation.
11) Build-in Bluetooth unit for remote monitoring and control purpose.
To Next Page
Loading...