Pylontech Force-L2 Product Manual

19PIFP0301
8 / 13
Status
System Status: blue means working normally; Orange means protection or failure.
Blue, slow flashing.
Power Relay CLOSE. Alarm exist but can work continue.
Blue, lighting.
Power Relay CLOSE. Normal.
Orange, slow flashing.
Power Relay OPEN. Normal protection, can recover on
its own (Over Voltage, Under Voltage, etc.).
Orange, lighting.
Power Relay OPEN. Important protection, failure, lost
efficacy etc. Or failed to assign address.
Battery Module Status
Battery Module Status: blue means working normally; Orange means protection or failure
Blue, slow flashing.
Alarm exist but can work continue.
Blue, lighting.
Normal.
Blue, light once.
1~n LED lights on one by one, for address distribution.
Orange, slow flashing.
Module offline.
Orange, lighting.
Module protection, failure, etc.
System Capacity
Indicate the system SOC.
Blue, slow flashing.
Each LED indicate 25%SOC. Idle
Blue, flashing.
Each LED indicate 25%SOC. Discharge
Blue, lighting.
Each LED indicate 25%SOC. Charge
Remark: Slow flashing: 1.5s ON/0.5s OFF. Flashing 0.5s ON/0.5s OFF.
Fast flashing: 0.1s ON/0.1s OFF.

Pylontech Force-L2 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	51.2 V
Capacity per Module	3.55 kWh
Usable Energy	3.2 kWh
Operating Temperature	-10°C to 50°C
Communication Interface	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 sec)	100 A
Protection Degree	IP20
Cycle Life	6000 cycles at 80% DoD