Pyramid 4000Pro - Alerts and Clock Synchronization; Buzzer and Bell Settings; Connecting External Bells

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 4000Pro/5000
+
/5000
+
HD
SET EVENT USING BUZZER/BELLS
CONNECTING EXTERNAL BELLS
1
1
2
3
4
5
2
3
Locate volume dial inside front cover to
left of display.
Turn dial clockwise to increase volume
& counterclockwise to decrease. NOTE:
Buzzer is intended for use in quiet
settings.
Sound the buzzer by scheduling an event
(See Event Menu on page 11).
The time clock has an internal buzzer & bell ringer interface option to alert workers (or
students) of start times, breaks, lunch and dismissal times. The internal buzzer will also
sound when the time clock sends a BCD signal to ring a bell.
Add up to 15 bells and/or horns & schedule up to 50 events using Pyramid Time System’s
TimeTrax™ Model 5300 Bell Ringer (sold separately).
Locate RJ-45 jack at back (4000Pro/5000+) or side (5000+HD) of time clock &
connect cable.
Connect other end of cable to TimeTrax™ 5300 Bell Ringer.
Connect 5300 transformer to receptacle labeled POWER.
Wire bells and/or horns in parallel to labeled terminals on the 5300.
See TimeTrax™ 5300 Instructions for detailed installation instructions.
Sound bell or horn by scheduling an event (see page 11).
10 BUZZERS, BELLS & WALL CLOCKS 888.479.7264