Pyramid Studio Pro PM-8501 - Troubleshooting

TROUBLESHOOTING
Your mixer should require very li
le maintenance. If you have problems, refer to
this chart for possible solutions.
NOTHING WORKS
NO SIGNAL FROM AN
AUDIO INPUT SOURCE
HUM FROM PHONO
HUM FROM OTHER
FEEDBACK
"SEQUELS"
Check the AG power connection. Make sure the AG
outlet is “live”
Check the power connection to the rest of the system
(amplifier/receiver, etc.)
Check the contro! setting
Check the connection between the mixer and the input
source.
Check the tumtable's ground wire (usually black or
green) to the mixer.
Make sure there are no low level inputs connects to
LINE input jacks.
Move the microphone further away from the output
speakers or use a directonal microphane.
14