Pyramid Studio Pro PM-8501 - Using the Sound Effect

OPERATION
————
B. B»: To fade in the input source selected by ASSIGN В and fade out the
input source selected by ASSIGN A.
C.
The
center
То
mix
the
input
source
selected
by
ASSIGN
A
and
ASSIGN
В
eoually
&.USING
THE
ECHO
(PM-8501/PM-8001)
А
The
echo
mode
is
applied
19
the
sound
after
all
the
inputs
are
mixed.
B.Set
the
ECHO
ON/OFF
to
ON
to
turn
on
the
echo
mode
and
activate
the
DELAY
and
REPEAT
functions,
C.The DELAY control lets you include a measured time delay to simulate an
echo.
Set
DELAY
towards
10
for
a
maximum
time
delay
and
towards
O
for
a minimum time delay.
D.The
REPEAT
control
lets
you
control
the
length
of
time
a
tone
is
repeated
(reverberation).
Set
REPEAT
towards
10
for
the
langest
time
and
towards
O
for
the
shortest
time.
E.The LEVEL control lets you control the output level of the echo effect.
Set
LEVEL
towards
10
for
raising
the
level
and
towards
0
for
lowering
the
level.
9.USING THE SOUND EFFECT (PM-8501/PM-7501}
AcThere are six pre-programed sound effects for your selection, LASER,
MACHINE GUN, TRON BLAST, SIREN, EMERGENCY. and- UFO.
Press
any
button
of
sound
effects
to
generate
the
sound
you
wish
to
mix,
it will play continously until you release the button to stop.
B.The SPEED Control: Lets you adjust the pitches of the effects.
C.The VOLUME Control: Lets you adjust the volume of the effects.