Pyramid Studio Pro PM-8501 - Eq;Bypass Switch; Mono;Stereo Selector

FUNCTIONS
14. EQ/BYPASS SWITCH
Push in to operate equalizer function, push out to defeat equalizer function.
15. MONO/STEREO SELECTOR.
Push in to get MONO master output, push out to get STEREO master output.
16. MASTER LEVEL CONTROL
Let you control the mixers overall volume level.
17, CUE ASSIGN SELECTOR
Let you select ће charnel where the desired audio input source is located
$6 you can monitor and prepare it before mixing it in.
18. CUE LEVEL CONTROL
Let you adjust the headphone's volume level.
19, HEAD PHONE JACK
6.3 mm jack head phone connection.
20. CUE/MASTER FADER (PM-8001/PM-4001)
Let you adjust the level of monitoring signal between assignd cue and
master output
21. ECHO ON/OFF SWITCH (PM-8501/PM-8001)
Set the switch to ON to activate the echo mode.
22. ECHO DELAY CONTROL (РМ-8501/РМ-8901)
Let you adjust the delay time of echo,
23. ECHO REPEAT CONTROL (PM-8501/PM-8001)
Let you control the length of time a tohe is repeated.
24, ECHO LEVEL CONTROL (РМ-8501/РМ-0001)
Let you control the output level af the echo effect.
25. DIGITAL SOUND EFFECTS (PM-8501/PM-7501)
Let you create the special sound performance fram the six pre-programed
sound effects.
26. SOUND EFFECT SPEED CONTROL (PM-8501/PM-7501)
Let you adjust the pitches of the sound effects.
27. SOUND EFFECT VOLUME CONTROL (PM-8501/PM-7501)
Let you adjust the volume of the sound effects.