Page 20
10.26 Maintenance and Priority Codes
Enter
Enter 2 digits for eight maintenance / priority codes. To disable an event insert blanks for
both e.g. 2 digit code
P.A. alarm entered at RKP
Fire alarm entered at RKP
Engineer mode entered
Bell fuse failure
Auxiliary fuse failure
Battery trouble
AC fail
Keypress Tamper
To use HEX codes, use the key to select the character required and the key to accept.
Reporting codes are automatically stored after pressing the
key.
10.27 Restoral Reporting Codes
Enter
e.g. 2 digit code
User Code Restoral
Bell Timeout Restoral
Battery restoral
A.C. Restoral
Test Transmission
To use HEX codes, use the
key to select the character required and the key to accept.
Reporting codes are automatically stored after pressing the
key.
10.28 Digicom Codes
Enter
Enter digit 0 - 6 .
SIA DTMF
SIA pulse format P1 - 1400 Hz handshake 10pps
SIA pulse format P2- 2300 Hz handshake 20pps
SIA pulse format P3 - 1400 Hz handshake 20pps
Reserved
Reserved
Reserved
To Next Page
Loading...
Need help?
General
