Pyronix Enforcer How To Set

How to Set your Pyronix Enforcer Alarm System
From Main Control Panel:
Ensure your front door is shut before setting your alarm.
Enter your 4 Digit Code or Present your Prox tag to tag reader.
Setting ‘A’ will light up RED
if using Prox tag, system will start to set the ‘A’ setting straight away.
Display will say ‘Please wait setting wireless’
Once the Timer starts you can then exit the door, you have 20-30 seconds to so.
Once you shut the door the Alarm will set after 5 seconds.
Unsetting your Pyronix Enforcer Alarm
When you open the front door the Alarm will start to beep with a 20-30 second
countdown.Either enter your 4 digit code or present your Prox Tag.

Pyronix Enforcer Specifications

General

Brand	Pyronix
Model	Enforcer
Category	Security System
Language	English