Python 991 User Manual

37
© 2008 Directed Electronics. All rights reserved.
Feature Opt 1 Opt 2 Opt 3 Opt 4 Opt 5
Button press
beep
On
Off back
System type Remote start
& Security
Remote start Back
Clock set
Clock time
Back
Menu option descriptions
Auto keypad locks
Automatically locks the remote buttons when the buttons are not used for
SECONDS0REVENTShACCIDENTALvPRESSESOFTHEREMOTE
Press then to unlock the keypad.
Note: If the auto keypad lock feature is programmed On, the remote auto-
matically unlocks when the vehicle ignition is turned Off. The remote stays
UNLOCKEDTOALLOWTIMETOEXITANDUNLOADTHEVEHICLEANDTHENLOCKTHE
doors with the remote. When the button is pressed, the keypad auto
lock feature resumes normally.
Page On or Off and Power saves
7HENPAGINGISh/NvTHEREMOTECHECKSTHESTATUSOFTHESYSTEMEVERY
four seconds, and reports any alarm triggers (if the system is within the
operating range).
)NTHEPAGINGh/FFvSETTINGTHEREMOTEDOESnot check the status of the
system. In the paging Off mode the remote will only beep and report when
a button on the remote is pressed.
)NTHEhBATTERYSAVERvMODETHEREMOTEGOESINTOSLEEPMODEIFNOBUTTONS
are pushed for 72 hours. The timer resets each time a button is pressed.
0AGE!LERT6IBE"EEP4ONE"OTHOR3CREENONLYs
Receive command confirmations on the remote with vibrations, beeps or
both, or with display only.

Python 991 Specifications

General

Brand	Python
Model	991
Category	Remote Starter
Language	English