Need help?Do you have a question about the Q CELLS Q.SMART Series and is the answer not in the manual?
General| Brand | Q CELLS |
|---|---|
| Model | Q.SMART Series |
| Category | Control Unit |
| Language | English |
Guidance for installers on system setup, expansion, modification, and maintenance according to local regulations.
Advice for operators on warranty registration, keeping instructions, and insuring the solar system against hazards.
States Q.CELLS' liability is limited and installation responsibility lies with the installer.
Technical specifications for Q.SMART UF, Q.SMART UF L, and Q.SMART modules including type, area, weight, and voltage.
Warnings and precautions regarding electric shock hazards during installation and operation, emphasizing safe disconnection.
Safety advice for handling modules to prevent injury from glass breakage or falling, including protective clothing.
Guidelines for choosing a suitable installation location, considering climate, temperature, and ventilation requirements.
Advice on positioning modules to maximize solar irradiation and avoid performance loss due to shading from objects.
Warnings regarding fire hazard from damaged modules and general safety during installation, including wind and rain precautions.
Requirements for ensuring safe mounting, adhering to national work safety and accident prevention regulations.
Information on fire protection classification for rooftop installations and adherence to safety instructions.
Notes on considering additional power boost and referring to simulation tools for yield optimization.
Reference to Q.CELLS clamp list for approved mounting variants and clamps for installation.
Requirements for point support, ensuring no contact between module and substructure and proper clamp support.
Guidelines for linear support, including placement of rubber support plates between module and substructure.
Instructions on module orientation, junction box position, drainage openings, and recommended tilt angles.
Design specifications for framed and unframed Q.SMART modules regarding wind and snow loads.
Requirements for the mounting structure to ensure statics, ventilation, thermal expansion, and corrosion prevention.
Guidelines for long-term stability, including clamp areas, module bending limits, and fastening points.
Specifies using only Q.CELLS approved clamp systems to avoid voiding the warranty.
Key requirements for clamp systems, including positioning, rubber support, and clamp overlap on glass edge.
Details on fastening framed modules with clamps, recommended torque, and general requirements.
Specific criteria for clamp systems, including width, height, depth, and clamp area.
Guidance on selecting modules of the same type and power class for optimal yields.
Explanation of applying a safety factor for Isc and Voc due to potential variations in current and voltage.
Rules for connecting modules in series, considering system voltage, power boost, and inverter limitations.
Recommendations for handling reverse currents, including string limits, string diodes, and string fuses.
Recommendations for inverter choice based on installation country and grounding requirements.
Conditions and procedures for installing functional grounding on the DC side of the solar array.
Procedure for grounding framed modules using Parker screws to specified grounding points.
Critical safety warnings for DC circuit work, plug disconnection, and polarity when installing electrical components.
Guidelines for selecting and using compatible solar cables and MC4 connectors for reliable connections.
Checklist for ensuring wiring protection, proper connection, and completion of safety tests.
Warning about electric shock and fire hazards from damaged modules and advice to contact installer immediately.
Safety warnings for cleaning modules, including temperature limits, avoiding conductive parts, and not cleaning damaged modules.
Step-by-step instructions for cleaning modules, using water, soft cloth, and optional isopropanol.
Recommendations for annual inspection of the solar system by a specialist installer for secure components and connections.
To Next Page
