2
1 INTRODUCTION PAGE 3
2 PRODUCT DESCRIPTION PAGE 4
3 SAFETY INSTRUCTIONS PAGE 5
3.1 TRANSPORT AND STORAGE PAGE 5
4 AREA OF USAGE AND INSTALLATION LOCATION PAGE 6
5 LAYOUT, MOUNTING AND INSTALLATION PAGE 7
5.1 MOUNTING LAYOUTS PAGE 8
5.2 MECHANICAL MOUNTING - UNFRAMED MODULES PAGE 10
5.3 MECHANICAL MOUNTING - FRAMED MODULES PAGE 11
5.4 ELECTRICAL LAYOUT PAGE 12
5.5 GROUNDING PAGE 13
5.6 ELECTRICAL INSTALLATION PAGE 15
6 TROUBLESHOOTING PAGE 15
7 CLEANING AND MAINTENANCE PAGE 16
8 DECOMMISSIONING AND RECYCLING PAGE 16
9 CONTACT PAGE 17
10 APPENDIX - APPLICATION NOTE GROUNDING PAGE 18
Technical parameters and design are subject to change. The data sheets and customer information valid at the point in time when
the relevant module was manufactured apply for the carrying out of installation, mounting or maintenance work on the solar modules.
DOCUMENT REVISION 3.0
This document applies for Europe for the following as of April 2012:
Q.SMART of product revision G1.3 and higher. For the solar modules up to product revision G1.2, please refer to the manual
„QCells_Installation and Operation Manual_CIGS Module_G1.0 - G1.2_2011-05_Rev07_EN“.
INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE - EUROPE
To Next Page
Loading...
