Why is the video distorted when searching local records on my Q-See DVR?
If the video is distorted when searching local records on your Q-See DVR, it might be due to: * Low video quality setting: Increase the video quality setting. * Program read error: Restart the NVR. * Hard drive data cable error: Check the hard drive data cable. * Hard drive malfunction: Replace the hard drive. * NVR hardware malfunction: Check the NVR hardware.
What to do if there is no video output to one or more channels on Q-See DVR?
If you're experiencing no video output on one or more channels of your Q-See DVR, consider the following: * Incorrect firmware: Use the correct firmware file. * Brightness at zero: Restore factory default setup. * Weak or absent video input signal: Check the video input signal. * Privacy mask setup: Adjust the privacy mask setup. * Hardware malfunctions: Check the combo NVR hardware.
Why can't I log in to my Q-See DVR client-end or web interface?
If you're having trouble logging into your Q-See DVR through the client or web interface, consider these possibilities: * Outdated operating system: Update to Windows XP or later if using Windows 98 or ME. * ActiveX control disabled: Enable ActiveX control. * Outdated video card driver: Upgrade your video card driver. * Network connection error: Check your network connection. * Network setup error: Correct your network setup. * Invalid credentials: Check your password or user name.
Why is the motion detection function not working on my Q-See DVR?
If the motion detection function isn't working on your Q-See DVR, it could be due to: * Incorrect period setup: Correct the period setup. * Incorrect motion detection zone setup: Correct the motion detection zone setup. * Low sensitivity: Increase the sensitivity.
Why does my Q-See DVR often automatically shut down or stop running?
Your Q-See DVR might be shutting down or stopping due to several reasons: * Unstable or low input voltage: Ensure stable input voltage. * Hard drive issues: Check the hard drive and cable for malfunctions. * Insufficient power: Ensure the device is getting enough power. * Unstable front video signal: Ensure a stable front video signal. * Overheating or dust: Improve the working environment. * System board malfunction: The system board may need replacement.
What to do if my Q-See DVR system cannot detect the hard drive?
If your Q-See DVR system cannot detect the hard drive, here are some things to check: * Ensure a hard drive is installed. * If installed, the hard drive may be damaged and need replacement. * Verify the hard drive cable connection is secure. * The main board SATA port might be damaged, requiring replacement.
How to troubleshoot unstable network connection on Q-See DVR?
If you're experiencing an unstable network connection with your Q-See DVR, consider the following: * General network instability: Ensure network stability. * IP address conflict: Resolve any IP address conflicts. * MAC address conflict: Resolve any MAC address conflicts. * Faulty network card: Check the network card on your PC or combo NVR.
General| Video Input Channels | 4 |
|---|---|
| Video Output | HDMI, VGA |
| Compression Format | H.264 |
| Remote Access | Yes |
| Power Supply | 12V DC |
| Operating System | Embedded Linux |
| Motion Detection | Yes |
| USB Ports | 2 |
| Storage Capacity | Up to 6TB |
| Network Interface | Ethernet |
| Hard Drive Support | 1 SATA |
| Hard Drive Capacity | Supports up to 6TB |
Essential safety warnings regarding electric shock risks before installing or using the equipment.
Instructions for safe operation, including power source, handling, cleaning, and ventilation.
Details front and rear panel connections for NVR models QC804, QC808, and QC8016.
Connects IP cameras locally or through a network and the internet.
Displaying video feeds from cameras in various screen layouts.
Accessing system functions via login, logout, and the main menu structure.
Configuring manual and scheduled recording for cameras.
Locating and reviewing recorded video footage from the NVR.
Setting up recording schedules based on time, day, and event type.
Configuring motion detection, video loss, and camera masking events.
Backing up recorded files to external USB storage or network.
Configuring NVR to activate based on connected external alarms.
Step-by-step guide for installing or replacing the NVR's hard disk drive.
Solutions for common NVR problems like boot issues, video distortion, and network errors.
To Next Page
