8988
Parameter QC818 QC828
Control Mode Front panel, USB mouse, IR remote control,
Keyboard, Network
Compression Compression
Format
H.264 and MPEG-4 dual codec
Video Video In
8 cameras max
8 channel input directly through POE block
Remote cameras may be accessed through network
Video Out
VGA x 1, HDMI x1
VGA Resolution 1920×1080, 1280×1024, 1280×720, 1024×768
Record Resolution 1080P(1920×1080) / 720P(1280×720) / D1
(704×576/704×480)
Record Frame Rate D1:
30fps/camera
720p:
30fps/camera
1080p:
15fps/camera
D1:
30fps/camera
720p:
30fps/camera
1080p:
30fps/camera
Record Bit Rate Up to 32Mbps
Supported IP
Cameras
Dahua, Arecont Vision, AXIS, Canon, Dynacolor,
Panasonic, Samsung, Sanyo, Sony, Onvif
Audio Audio Input 1 channel, RCA(200-2800mV, 30KΩ)
Audio Output 1 channel, RCA(200-3000mV, 5KΩ)
Alarm Alarm Input 16 Channel
Alarm Output 3 Channel
Storage Record Mode Manual/Sensor/Schedule/Motion Detection/Camera
Loss/Camera Block/Alarm
Multi-Function Simultaneously Record, View Live or Recorded
Video, Playback, Back-up files, Monitor Remotely
Interface Network Interface RJ45 (LAN, Internet)
Communication
Interface
RS485, RS232
USB 2.0 x 2 (One for Backup, One for USB Mouse)
Controls Front panel, USB mouse, IR remote control,
Keyboard, Network
Disk info Disk Type SATA x 2 (up to 3TB)
Other info Voltage DC12V/5A 48V/2.5A (POE)
Optimal
Temperature
14°F to 131°F /-10°C to 55°C
10% to 90% Humidity
Power
Consumption
20W (without Hard Drive)
Q-See is proud to back all of our products with a conditional service warranty covering all
hardware for 12 months from the date of purchase. Additionally, our products also come with
a free exchange policy that covers all manufacturing defects for one month from the date of
purchase. Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the following
reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper power,
extreme environmental temperatures, humidity, lightning and sudden surges of
electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration process after
purchasing our product. To do this, simply fill out the User’s Information Card on our website
at www.Q-See.com
Q-SEE PRODUCT WARRANTY
To Next Page
Loading...
Need help?
General
