Q-See QSD9004V - 5.2.6 Device Management; 5.2.6.1 HDD Management

User Manual
19
6
Slow play, Normal play, Fast Play
15
Convert AVI
7
Next Hour
16
OSD
8
Capture picture
17
Mute switch
9
Reduce window
18
Volume adjust
4 、 Please refer to the below [Video on] setting procedure (System default - video for every channel is on)
5 、 Refer to the below for [Audio on] setting procedure. (Setting parameter will be available after re-starting
multimedia player after [Audio on] set up.)
SettingAudio channel setting  Normal video BarSelect the channel you want to playback the
audioSelect the channel has audio filesApplyOK.
After successfully setting the above, when you playback the current channel, you can open the channel’s
audio function at the same time as the video
5.2.6 Device Management
5.2.
5.2.5.2.
5.2.6
66
6.1
.1 .1
.1 HDD Management
HDD ManagementHDD Management
HDD Management
SettingVideo play setting Normal video
BarSelect the channel you want to display Select
to play the videoApplyOK
Options in device management include Hard drive,
External Alarm, PTZ control, Mobile Phone Monitoring, and
Motion Detection.
Click [Main MenuDevice  HDD] to enter [HDD
Management] menu (shown as Picture 5-30)
Picture 5-27
Picture 5-27A
Picture 5-28A
Picture 5-28B
Picture 5-29